Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About Hydrogasm

  • Rank
  1. Hydrogasm

    Jack plate

    Davey W Larry has my Cougar 22MTR with a 6" Bob's hydraulic on it that always worked perfect for me. Don't spend any money on a jackplate, just sell me the boat without your motor or jackplate as I have an 8" Bob's hydraulic plate just waiting to be mounted. LOL Larry Any changes to the Cougar planned? Thanks Gary garyeisnor@eastlink.ca
  2. Since before I sold my Cougar 22MTR to Larry (Euroski) last year I have been interested in an STV Euro. I am looking for an STV Euro with a 20" transom without power on a trailer somewhere in the northeast. I would like to find one that needs re-rigging and a little TLC but will consider one that has been done and just needs an engine or a turnkey package with Merc power. I may also consider a 4 seater River Rocket as well. Please e-mail me directly on what you have to offer with a description of your boat, asking price and photos. My e-mail is garyeisnor@eastlink.ca Thanks Gary
  3. Congratulations Larry, you bought one of the nicest Cougar 22MTRs built. I hope you will enjoy it as much as I did. Post some photos here after you get it rigged. Thanks again Gary
  4. I am still interested in a trade down for a EuroSki. I am not on here alot so please e-mail me directly at garyeisnor@eastlink.ca if you have any questions. Thanks Gary
  5. I updated the info for the ad and added some photos. Take another look. I am still interested in a EuroSki partial trade as well. Thanks Gary
  6. I found this on CraigsList: http://stcloud.craigslist.org/boa/1657723001.html I have called and left a couple of messages with response yet. Does anyone know the boat or the owner? Let me know. Thanks Gary
  7. I have a very interested party on my Cougar 22MTR, so I am looking for a Euro without power, preferably rigged for a Merc. I think he is going to buy mine w/o the blown 300X, so I plan to rebuild it and put it on whatever hull I buy. I would like to find something in the northeast but will travel farther for the right boat. I might also consider a River Rocket as well. If you have one for sale or know of one let me know at garyeisnor@xplornet.com or by phone at (902)678-7188. Thanks Gary
  8. SOLD PENDING RECEIPT OF FUNDS!! I have decided to offer the boat as a turn-key package with a fresh, rebuilt 2003 300X. The motor will have new sleeves in 2 & 4, new rings, bearings, seals and gaskets. It has an offshore mid, Sportmaster 1.62:1 gearcase with MadEFI 4 seal billet carrier below the water pump and double seal shift-shaft seal housing and new propshaft seals. The motor has 131 freshwater hours. The powerhead off the mid and completely dis-assembled, ready for rebuilding. The boat is white and blue with yellow, gray and black accents all in the gelcoat. It comes fully loaded with SeaStar Pro Sport tilt helm, dual Pro-Trim, Bob's 6" hydraulic jackplate, custom factory through bolted and braced setback, white on white Gaffrig 100mph speedo, 8K tack, fuel, volt, temp, water pressure, Gaffrig mechanical trim indicator, SmartCraft monitor, shift & throttle w/trim switch and Bob's LED lift gauge. The boat has 2-20 gal. aluminum tanks, interior lighting, power hatch actuator, billet ski pole, twin fiberglass swim steps with an Aqua-step retractable ladder, factory fixed trim tabs, docking lights, pop-up bow light, stern light, billet grab handles, boarding steps, 4 pull-up mushroom cleats, yellow gauge bezels and tons of storage under the bow and hatch. Tunes are provided by a Clarion Marine CD player, a Bazooka 4 channel marine amp and 4 6.5" Marine speakers with billet grills. I had a custom Sunbrella full cover made for the boat that has straps for trailering and a matching cover for the motor as well. The boat rides on a custom built Cougar tandem torsion axle trailer that features chrome wheels and a removable tongue, so it will fit in a 26.5' deep garage. The boat ran a touch over 92mph on GPS with a Mazco RE4 30 to about 6,400rpms. The boat was a Cougar photo boat used in their ads in Hot Boat and other magazines when it was tested at Lake X in Florida. I would rate the boat a solid 8.5-9, as there are a few little cracks in the gel around the front of the painted windscreen from walking on the deck, some light scratches on the bottom from being beached one time, the tops of the seat backs are stained a little from the cover and the trailer has some blistering in the paint with a little pitting on the wheels, all of which is cosmetic. There were only a handful of 22MTR outboards made and are very hard to find used. I searched for about 2 years before I found this one. I will offer three different purchase options. 1) Turn-key with a complete re-build on the motor and a Mazco RE4 26" prop for $37,000.Cdn OBO. 2) Motor as is, you have the motor re-built for $33,500.Cdn. OBO. 3) No motor, trim pump, oil tank or prop $26,000.Cdn OBO. If you have any questions or would like more info, I can be reached at (902)678-7188 eves or by e-mail at garyeisnor@xplornet.com I will help with delivery. Please click on the PhotoBucket link below to see all the photos I have of the boat and note that some of the equipment shown is not included in the sale. Items not included are the Rockford Fosgate amps & speakers,Pioneer CD player & radio bezel, Land & Sea foot throttle, Gaffrig GPS speedo and dual battery charger. I will consider all reasonable offers or an older STV Euro Ski as partial trade. Thanks Gary />http://s227.photobucket.com/albums/dd38/Hydrogasm/?albumview=slideshow
  9. I am looking to buy any Mazco RE4s in the 24 to 28 pitch range that have a fat-shaft hub. Let me know what you have. E-mail me at garyeisnor@xplornet.com with pics, description and price including Air Mail Postage to Aylesford, Nova Scotia, Canada B0P 1C0. Thanks Gary
  10. Dreamer I have 3 props that I would like to sell. Mazco RE-3 14.5 X 28 very good condition asking $300.US Mercury 14.5 X 26 chopper very good condition asking $225.US Mercury 14.5 X 28 cleaver in excellentcondition,thinned, polished and balanced by Precision Propeller asking $450.US. I can e-mail photos of any props you might be interested in, just e-mail me at nancy.hindle@ns.sympatico.ca and send them to you or anyone else who might be interested. These are spare props that do not work on my 21' Talon/300 Mariner Super Magnum package. If you have any other questions,let me know. Thanks Gary
  11. Hydrogasm

    prop wanted

    I have a 14.5x26" Mercury chopper I would sell. It is in very good condition,never worked on. I would like $225. US plus postage for it. E-mail me at nancy.hindle@ns.sympatico.ca and I'll send you some photos of it. Thanks Gary
  12. JStone I may be interested in your Liberator. Send me some info and a couple of photos if you have them in your PC. Here is my e-mail address. nancy.hindle@ns.sympatico.ca Thanks Gary
  13. I have a Merc 15"x28" 3 blade cleaver for sale that I bought used but never ran it. It was thinned and polished by Precision Propeller just before I got it. I have attached a photo of it and have others available. I am asking $450. US for it but will consider all others or may take a Mazco RE3 or 4 on trade. E-mail me at nancy.hindle@ns.sympatico.ca directly with any questions or offers. Thanks Garynancy.hindle@ns.sympatico.ca
  • Create New...